Telemetry between measuring points
Telemetry can use GSM communication between remote measurement points and a central control system. The installed equipment and network requirements are confirmed for the project.
NordWatch Automation · Data mirroring
Gate2Gate
Operational readings shared between connected systems.
Gate2Gate connects operational data from measuring points and external systems with your control centre and the Emiko platform. Specify the values, communication requirements and systems that need to share them.
- Operational data exchange
- Analog and digital readings
- Emiko integration
- Project-specific configuration
NordWatch Automation
Explore this division
- telemetry, no cables to remote measuring points
- GSM
- warnings when a value crosses its limit
- SMS
- configuration and firmware updates
- Remote
- readings mirrored into the platform
- Emiko
Key features
What Gate2Gate telemetry does for your measuring points
Gate2Gate brings measured values into the control and reporting systems that need them. Telemetry and system integration are specified around the existing measuring points.
Wireless measurement transfer
The telemetry solution supports SMS or GPRS transmission. Confirm the communication hardware and supported service for the intended deployment.
Analog and digital values
Real time transmission of analog and digital readings such as flow, pressure, water level, temperature and corrosion protection levels in pipelines.
Warning SMS system
In case of theft, battery failure or equipment malfunction the unit sends an automatic warning SMS, so operators can respond quickly.
Remote configuration functions
Telemetry equipment can support remote configuration and firmware handling. Confirm which functions apply to the installed units and connection.
Fit the existing measurement site
Specify the available space, sensor interfaces, power and communication requirements at each measuring point before choosing the field arrangement.
Data mirroring in Emiko
Structured operational data is exchanged between external systems and Emiko, so the same values are available in the cloud and in your control centre.
Heating and water supply
Built to optimise heating and water supply systems: measured data supports the balance between demand and flow and gives effective monitoring and control.
Applications
Where Gate2Gate telemetry is used
Gate2Gate suits any decentralised measuring point where cabling is impractical and a stable data flow matters.
District heating
Flow and temperature readings from remote points help keep heat demand and flow in balance.
Water supply
Water levels, pressure and flow from wells, reservoirs and pumping points reported to the control centre.
Pipeline protection
Corrosion protection levels in pipelines are transmitted continuously for early detection of problems.
Remote sites
Measuring points in areas with difficult access or extreme conditions, where a small GSM unit is the practical option.
How it works
How Gate2Gate moves data from the field to the control centre
Start with the required values and the systems that use them. The field connection and Emiko data-mirroring setup are agreed as parts of the same project.
Gate2Gate is used for operational data exchange between measuring points, central control systems and the Emiko platform. Telemetry functions include transferring analog and digital readings over GSM using SMS or GPRS. The physical field equipment, power and communication service are confirmed for the installation.
Within Emiko, Gate2Gate provides a system-to-system gateway for structured data mirroring. List the external systems and required values first, then confirm the supported interfaces, mapping and any remote configuration or warning functions.
Identify the measured values and systems that need to share them
Review the existing sensors, field equipment, power and mobile connection
Confirm the supported interfaces and telemetry arrangement
Configure data mapping into the control system and Emiko
Agree applicable warning, remote configuration and maintenance functions
Ecosystem
Gate2Gate as a data mirroring module on Emiko
Within Emiko, Gate2Gate provides structured operational data exchange between connected systems.
Gate2Gate acts as a data-mirroring layer between external systems and the Emiko platform. The project defines which values are exchanged and where they are displayed, logged or used. Supported systems, formats and interface details are confirmed before implementation.
For a compact controller that reads local I/O and switches outputs, compare FlexGuard. It serves a different requirement from system-to-system data exchange.
- Structured operational data exchange between systems
- Measurement values available in the agreed control and Emiko views
- Project-specific data mapping and interface review
- Configured warning and remote-maintenance functions
Product guide
Industrial telemetry with Gate2Gate, from field to control centre
Use Gate2Gate where operating data needs to move between remote measurement points, a central control system and Emiko. Define the values and interfaces first, then select the telemetry and integration arrangement.
Who needs industrial telemetry and data mirroring
Utilities and site operators use operational readings such as flow, pressure, water level and temperature in their control and reporting systems. Gate2Gate addresses the exchange of that data from distributed measurement points and between connected systems.
Applications include heating and water supply networks. The useful starting point is a data requirement: which values need to move, which system produces them and which system will use them.
Review the measuring point and communication arrangement
Document the existing sensors or meters, available interfaces, power and physical access at each measurement point. Telemetry can use GSM transfer through SMS or GPRS; the actual communication equipment and available network service must be checked for the proposed installation.
Wireless transmission can avoid a data cable between a remote measuring point and the control centre. It does not remove the need to specify local sensor connections, power and installation conditions.
Map the values into the control system and Emiko
The Emiko Gate2Gate module exchanges structured operational data between systems. Agree which values will be mirrored, their source and destination, and how each value will be identified and used. Supported systems, protocols and formats are confirmed for the project.
The Emiko platform provides the connected operating view. Gate2Gate is not a physical gate-access controller; for that application, see GateKeeper access control.
Define warnings and maintenance responsibilities
Telemetry functions include warning SMS for theft, battery failure or equipment malfunction, plus remote configuration and firmware handling. Confirm which functions apply to the installed equipment and communication setup.
Specify the recipients of warnings and who will investigate a missing reading or device fault. Remote tools can reduce some site visits, while physical inspection and maintenance remain part of the operating plan.
Prepare a data-exchange project
Share the number of measuring points, their locations, the available equipment and the systems that need the data. Include existing interface documentation and the values to exchange so Vikingegaarden can assess the required mapping, communication and field arrangement.
If the requirement is to read local contacts or a sensor and switch an equipment output, compare FlexGuard remote monitoring and control. Gate2Gate focuses on getting operational data between the systems that need it.
Good to know
Frequently asked questions about Gate2Gate
What kind of data does Gate2Gate transmit?
Gate2Gate transmits measured data such as flow, pressure, water levels, temperature and corrosion protection levels in pipelines. Both analog and digital values are sent in real time to the control centre and mirrored in the Emiko platform.
Which communications and interfaces does Gate2Gate support?
Gate2Gate telemetry can use GSM transmission using SMS or GPRS. The Emiko module provides structured data exchange between systems. Confirm the installed hardware, available mobile service, external-system interfaces and data formats for the proposed project.
Which Gate2Gate maintenance functions can be performed remotely?
Telemetry functions include remote configuration and firmware updates over the GSM connection. Confirm the available functions for the installed equipment and communication service. Physical equipment inspection remains part of the site maintenance plan.
What happens if a unit is stolen or its battery fails?
Gate2Gate has a warning SMS system. In case of theft, battery failure or equipment malfunction it sends an automatic message to the operator, so problems can be handled quickly and proactively.
What information is needed to specify a Gate2Gate project?
Provide the values to exchange, the number and location of measuring points, the existing equipment and control systems, and the available power and communication arrangements. Interface support and any field hardware are confirmed as part of the project specification.
How does Gate2Gate differ from FlexGuard?
Gate2Gate addresses telemetry and structured operational data exchange between measuring points and systems. FlexGuard is a local I/O unit for monitoring equipment signals and switching configured outputs. Select the product around the job the connection must perform.
Can Gate2Gate exchange data with an existing control system?
System-to-system exchange is its purpose, but support for a particular control system or protocol is confirmed per project. Send the system names, available interface documentation and the values you need to exchange. No universal compatibility is assumed.
What is data mirroring?
Data mirroring means keeping the same operational data available in more than one system. With Gate2Gate, values measured in the field are transmitted to the control centre and mirrored in the Emiko platform, so the readings can be shown, logged and shared where they are needed instead of staying locked in one device.
Have a question about your project?
Talk to our teamExplore
More telemetry and data mirroring solutions
Let’s talk about your project
Let's plan your Gate2Gate installation
Tell us which values you need to mirror, how many measuring points you have and where they are. We help with configuration and rollout.