Complete solution · AtoN House Nordic
AtoN monitoring retrofit
A NaviGuard retrofit connects supported existing aids to navigation and power equipment to Emiko.
Commissioning verifies the status, alarms and controls supported by each connected instrument.
The components
Equipment
and interfaces
3 components with specified functions.
The labels identify their Emiko integration.
- 01Full Emiko integration
NaviGuard
NaviGuard controller
Connects supported instrument profiles or PowerMonitor current sensing to Emiko.
Product page - 02Full Emiko integration
PowerGuard
PowerGuard supply
Replaces an inadequate controller supply where required; reports its own supply status and alarms to Emiko.
Product page - 03Full Emiko integration
Emiko platform
Emiko platform
Presents supported equipment status, alarms and remote settings under the configured user permissions.
Product page
How it works
From the plan to the
commissioned installation
An equipment survey establishes compatibility. The confirmed interfaces define the monitoring scope.
- 01
Survey equipment
The survey records instrument models, software versions, interfaces, supply capacity and communications coverage.
- 02
Confirm interfaces
A released serial profile or suitable PowerMonitor connection is selected for each instrument.
- 03
Assess power
Verify controller power, internet coverage, protected cabling and enclosure; specify PowerGuard if the supply is inadequate.
- 04
Configure monitoring
Sites and instruments are configured in Emiko with access rights, alarms and notification recipients.
- 05
Verify handover
Commissioning verifies available measurements, current-based alarms and supported commands before handover.
Where it is used
Existing aids requiring remote monitoring
Harbour and coastal authorities adding monitoring to existing lanterns and power installations with confirmed interfaces.
- 01
A coastal network with several lantern models and interfaces
- 02
A harbour with separate light and power monitoring arrangements
- 03
A buoy fleet with supported position-reporting equipment
Planning
Delivery scope
and equipment options
Delivered by Vikingegaarden
- Equipment specification from the marking plan, site data and operating requirements
- Component supply with the agreed manufacturer documentation
- Installation and commissioning, or technical support for the appointed contractor
- Emiko configuration and acceptance checks for supported equipment interfaces
- Service scope, inspection requirements and spare parts confirmed in the quotation
Good to know
Before the
quotation
What does PowerMonitor report?
PowerMonitor monitors current draw during expected lantern operation. It does not provide internal lantern status or remote settings. Those functions require a supported instrument interface and released profile.
Does monitoring replace site inspections?
Remote information supports fault assessment and service planning. Physical inspections, cleaning, battery checks and maintenance remain part of the site service plan.
What is required for a quotation?
The enquiry requires an equipment inventory with model names, interfaces, software versions and supply details. Site locations, communications coverage, required signals and alarm recipients should also be identified.
Plan this solution
Project quotation
The specification defines the equipment, installation scope and price.
The enquiry requires a chart, positions, marking requirements, mounting details, available power and required autonomy.